Car logo light
diameter 2.2cm length 6.0cm
native driver,5pc lens, more brighter
diameter 1.8cm length 4.5cm
diameter 1.9cm length 3.8cm
diameter 2.0cmlength 5.0cm
native driver,5pc lens, more brighter, no need punching
Car led welcome light Features:
1· Environment friendly and power saving .
2· Durable and non-fading brilliant beams.
3· Elegant exterior packaging
4· Designed for auto modification fancier.
5· Water-proof, dustproof and shockproof design
Car led welcome light is a new-type green light for the car.It is through the led light irradiate on the film,make the picture of film take on the irradiated object through the lens’s refraction,the principle of car led welcome light is similar to the slide projector. Led illuminant part adopted the progressive Constant current control technology, uniformity of luminance, light colorful, enduring constant, non-pollution, no electric noise, and no electronic interference.
How to install into the car?
1. This product should be installed at the bottom of the door flame and make sure the Len vertical with the ground ;
2.Pull down the inside door board first. Mark the suitable location for drilling a hole.
3. Drill the hole on the door board with our borer .
4.Inset the product from the bottom of car door ,then arrange the power cord
5.Install the nut through the power cord upon the hole inside; tighten the nut
6. Connect the power cord according to the installation guide;
7. Adjust the lamp projection to the suitable place with wrench tool.
8. Reinstall the inside door board, then check the final effect.
5.Good cooling performance
Packing box size:14*12*4CM
Carton size:41*30*63CM (100set/carton）
The weight of product:0.15kg
Total weight with packing box:0.25kg
One set include:2pc light,1pc drills,and packing box
Guangzhou Liwin Electronic Technology Co., Ltd